Advertisement
Table of Contents
OWNER'S
MANUAL
MODEL NO.
HK-306
CAUTION
For Operation
Read Rules And
Instructions Carefully
STATEMENT
OF POLICY
It is the policy of Worksaver,
Inc. to improve its products
where
it
is
possible
practical to do so. Worksaver,
Inc. reserves the right to make
changes
or
improvements
design and construction at any
time
without
incurring
obligation
to
make
changes
on
manufactured units.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Select an area for assembly that is clean and free
of any debris, which might cause persons
working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical
devices.
3. Preview the assembly instructions in your
operator's manual before proceeding further.
4. If the assembly instructions call for parts or
assemblies to be blocked up, use only blocking
material that is in good condition and is capable
of handling the weight of the assembly to be
blocked. Also insure that the blocking material is
on a clean, dry surface.
5. Never put hands, or any other part of body under
blocked up assemblies if at all possible.
Packing
Assembly & Mounting
Operating Instructions
and
in
the
these
previously
CAUTION
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
WORKSAVER, INC.
P.O BOX 100, LITCHFIELD, IL. 62056-100
Phone: 217-324-5973 Fax: 217-324-3356
E-Mail:
sales@worksaver.com
3 PT. HITCH ADAPTER KIT
HK-306
For A.C. Models
D-14 & D-15 Tractors
6. After completing assembly, thoroughly inspect
the machine to be sure that all nuts, bolts,
hydraulic fittings or any other fastened
assemblies have been thoroughly tightened.
7. Before operating the machine, thoroughly read
the operation section of your operator's
manual.
8. Before operation, read the maintenance section
of your operator's manual to be sure that any
parts requiring lubrication such as gearboxes
are full to avoid any possible damage.
9.
Before operating equipment. If you have
any
questions
assembly
Worksaver dealer or representative.
Web Site: www.worksaver.com
Maintenance
Repair Parts
.
regarding
the
or
operation,
contact
proper
your
Advertisement
Table of Contents
Related Manuals for Worksaver HK-306
Summary of Contents for Worksaver HK-306
- Page 1 MODEL NO. HK-306 CAUTION For Operation Read Rules And Instructions Carefully STATEMENT OF POLICY It is the policy of Worksaver, Inc. to improve its products where possible practical to do so. Worksaver, Inc. reserves the right to make changes improvements design and construction at any 3 PT.
-
Page 2: Tractor Preparation
BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! Instructions The Model HK-306 hitch adapter kit is designed for lift arm-leveling assemblies into the snap couplers, and the Allis Chalmers Model D-14 and D-15 tractors. -
Page 3: Operation
The stabilizer bars should be used whenever Instructions (Continued from page 1) possible, as they not only prevent side sway, but also provide rigidity and stability to the unit – plus added The stabilizer bars need to be reconnected and strength. - Page 4 EXPLODED PARTS VIEW OF FOR HK-306 Obey All Safety Warnings Page 3...
- Page 5 REPAIR PARTS FOR HK-306 3-PT. Hitch Adapter Kit Page 4...
-
Page 6: Safety Precautions
(5) parts failing through use of implement for purposes 4. NAME OF ITEM other than those for which it was designed. The obligations assumed by Worksaver and the limitations expressed herein are in lieu of MARCH 2001 all other warranties expressed or implied.
Need help?
Do you have a question about the HK-306 and is the answer not in the manual?
Questions and answers