Table of Contents
Advertisement
Quick Links
OWNER'S
MANUAL
MODEL NO.
HK-305
CAUTION
For Operation
Read Rules And
Instructions Carefully
STATEMENT
OF POLICY
It is the policy of Worksaver,
Inc. to improve its products
where
it
is
possible
practical to do so. Worksaver,
Inc. reserves the right to make
changes
or
improvements
design and construction at any
time
without
incurring
obligation
to
make
changes
on
previously
manufactured units.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Select an area for assembly that is clean and free
of any debris, which might cause persons
working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane,
jack, tackle, fork trucks or other mechanical
devices.
3. Preview the assembly instructions in your
operator's manual before proceeding further.
4. If the assembly instructions call for parts or
assemblies to be blocked up, use only blocking
material that is in good condition and is capable
of handling the weight of the assembly to be
blocked. Also insure that the blocking material is
on a clean, dry surface.
5. Never put hands, or any other part of body under
blocked up assemblies if at all possible.
Packing
Assembly & Mounting
Operating Instructions
and
in
3 PT. HITCH ADAPTER KIT
the
these
CAUTION
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
WORKSAVER, INC.
P.O BOX 100, LITCHFIELD, IL. 62056-100
Phone: 217-324-5973 Fax: 217-324-3356
E-Mail:
sales@worksaver.com
HK-305
For A.C. Models
WD & WD45 Tractors
6. After completing assembly, thoroughly inspect
the machine to be sure that all nuts, bolts,
hydraulic fittings or any other fastened
assemblie s have been thoroughly tightened.
7. Before operating the machine, thoroughly read
the operation section of your operator's
manual.
8. Before operation, read the maintenance section
of your operator's manual to be sure that any
parts requiring lubrication such as gearboxes
are full to avoid any possible damage.
9.
Before operating equipment. If you have
any
questions
regarding
assembly
or
operation,
Worksaver dealer or representative.
Web Site: www.worksaver.com
Maintenance
Repair Parts
.
the
proper
contact
your
Advertisement
Table of Contents
Related Manuals for Worksaver HK-305
Summary of Contents for Worksaver HK-305
-
Page 1: Operating Instructions
MODEL NO. HK-305 CAUTION For Operation Read Rules And Instructions Carefully STATEMENT OF POLICY It is the policy of Worksaver, Inc. to improve its products where possible practical to do so. Worksaver, Inc. reserves the right to make changes improvements... - Page 2 BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety The Model HK-305 hitch adapter kit is designed for the Allis Chalmers Model WD and WD45 tractors.
- Page 3 Instructions (Continued from page 1) the stabilizer bars need to be reconnected and adjusted so that the implement is centered behind the tractor. Remove the two (2) U-Clamps from the top link bracket, and then slide them over the rocker shaft of the tractor.
- Page 4 EXPLODED PARTS VIEW OF FOR HK-305 Obey All Safety Warnings Page 3...
- Page 5 REPAIR PARTS FOR HK-305 3-PT. Hitch Adapter Kit Page 4...
-
Page 6: Safety Precautions
(5) parts failing through use of implement for purposes other than those for which it was designed. The obligations assumed by Worksaver and the limitations expressed herein are in lieu of all other warranties expressed or implied.
Need help?
Do you have a question about the HK-305 and is the answer not in the manual?
Questions and answers