Table of Contents
Advertisement
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a
camping trip), you can configure the projector to act as a wireless hotspot to create a closed
network for devices to connect directly to the projector via a wireless connection and to project
files from their local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
hardverskog ključa on page
2. Power on the projector (see
3. On the home screen of the BenQ Launcher interface select the Settings button and press
OK.
4. Select Hotspot and press OK.
50
Upotreba (pod Launcher izvorom)
8).
Uključivanje projektora on page
Instalacija bežičnog
22).
Advertisement
Table of Contents
