Table of Contents
Advertisement
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a
camping trip), you can configure the projector to act as a wireless hotspot to create a closed
network for devices to connect directly to the projector via a wireless connection and to project
files from their local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
hardverskog ključa on page
2. Power on the projector (see
v01.00.19.00 on page
3. On the home screen of the BenQ Launcher interface, press the down arrow
three times to navigate to the Settings menus.
4. Select Settings and press OK.
5. Select Hotspot and press OK.
8).
Dodatak: Upotreba (Launcher) za verziju softvera stariju od
107).
Dodatak: Upotreba (Launcher) za verziju softvera stariju od v01.00.19.00
Instalacija bežičnog
key the
117
Advertisement
Table of Contents
