Table of Contents
Advertisement
If Y ou Encounter a Problem
If a module appears dead
If the mainframe power light does not come on, the mainframe or another
module within the mainframe is bad. If the mainframe does power-up, the
fault lies with the HP 70341A.
If the module front panel LEDs do not light when the
MMS is turned on
Check that your display or mainframe is working properly by removing the
HP 70341A and recycling power.
Refer to the display or mainframe installation manual for information
regarding proper operation.
Contact the nearest Hewlett-Packard oce for service.
If the mainframe power light is on, but the ventilation
fan does not start
Set the mainframe LINE (Mains) switch to OFF.
Check for blockage of the fan intakes at the bottom rear of the mainframe.
Refer to your MMS mainframe manual.
N O T E
The HP 70004A Display fan is very quiet.
2-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
