Agilent Technologies 70341A Installation Manual page 19

Installing the HP 70341A
This chapter provides step-by-step instructions for installation of the
HP 70341A frequency extension module into the MMS. The procedures
assume that you have already installed and veri ed operation of the
HP 70340A modular signal generator.
When you have completed the installation of the HP 70341A, refer to the
HP 70340A/41A Calibration Guide for performance veri cation or incoming
inspection procedures.
If you have diculty running any of these procedures, the chapter, \If You
Encounter a Problem," lists commonly encountered problems and solutions
that allow you to quickly get back to work.
The tools required for installation include:
8 mm hex ball driver, HP part number 8710-1307
torque wrench, size 5/16 in, torque = 8 lbs-in
1-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com