Table of Contents
Advertisement
WLAN
In the WLAN sub-menu it's possible to view the status of the two wire-
less channels of the inverter, and to disconnect the channel 2.
•
Channel 1: "Access Point mode": Only local communication is
enabled in this mode; In particular, the WLAN acts like an «access
point» generating a wireless network to which the user can connect
locally, configure the inverter / photovoltaic system, using the direct
access to the embedded Web User Interface
Wireless connection - "ACCESS POINT MODE" COMMUNICATION
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
Internal Webserver
User Interface
(IP 192.168.117.1)
•
Channel 2 "Station Mode": In this operating mode is possible
to connect the inverter to a WI-Fi router; in this condition remote
monitoring is enabled accessing to Aurora Vision
Direct Access
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
IP given by router
DHCP server
- 124 -
Direct Access
IP given by inverter
DHCP server
IP given by inverter
DHCP server
Wireless connection
Aurora Vision Plant Viewer™
Aurora Vision Plant Viewer for Mobile™
Aurora Vision Plant Portfolio Manager™
Customer SSID
7 - Operation
CLOUD platform.
®
IP given by router
DHCP server
Advertisement
Table of Contents
