TP-Link VIGI NVR1008 User Manual page 29

Chapter 2
3. Click Edit in the connected device list. Then enter the password in
After a successful verification, the connected status will change from
■ When Plug and Play Disabled
When plug and play is disabled, follow the steps below to add cameras.
1. Right click on the Live View screen and click
right click on the Live View screen and click
> Device Access > Add Device.
Add Camera in the pop-up Main Menu. Alternatively,
Settings in the pop-up Main Menu, then go to
Configure Your Network Camera
Edit Channel and click Save.
Not certified to Connected.
Camera
25