TP-Link VIGI NVR1008 User Manual page 72

Chapter 4
4. 4. 1 View and Configure Settings of Hard Drive
In Hard Drive Management, you can view the parameters and configure the properties and disk group
of hard drive. You can also enable the NVR to overwrite the earlier recording files when the hard drive
is full.
To view and configure the settings of hard drive, right click on the Live View screen, click
pop-up main menu, then go to
Save after you finish the configuration.
Circular Write of Disk
Disk No.
Capacity
Free Space
Status
Properties
Storage > Hard Drive Management
Enable the NVR to overwrite the eariler recording files when the hard
drive is full.
Displays the number of hard drive.
Displays the total space of hard drive.
Displays the remaining storage capacity of hard drive.
Displays the status of hard drive.
Select the properties of hard drive.
Read-write: The data can be read and written on the hard drive.
Read-only: The hard drive can only read data.
Recording and Storage
Settings
> Hard Drive Management. Click
in the
68