TP-Link VIGI NVR1008 User Manual page 99

Chapter 6
Buzzer
Recording Linkage
Pop-up Alarm
Screen
White Light Alarm
Audible Alarm
5. Set the alarm schedule. Click Apply.
6. Click Save to save the settings.
7. (Optional) Click
settings to other channels. Then click
6. 4 Line Crossing Detection
Line crossing detection triggers alarm actions when cameras detect that moving objects cross a
customized virtual line. You can customize the line crossing detection settings, select the triggered
actions and set the alarm schedule. Follow the steps below to finish the configuration.
The buzzer on the NVR will beep when the area intrusion is detected.
The channels you select for recording linkage will start recording when
the current channel detects an intrusion in the area.
The channel in Live View will be in full screen when an intrusion in the
area is detected.
(Only supports camera models with light alarm) The camera will trigger
light alarm when an intrusion in the area is detected.
(Only supports camera models with audible alarm) The buzzer on the
camera will alarm when an intrusion in the area is detected.
Copy to other channels, select the channels and click
Save in Area Intrusion
Yes if you want to apply the
to save the settings.
Events and Alerts
95