Chapter 2
•
When Plug and Play is disabled, enter the password manually in the pop-up window to verify
it. Click Add.
2. 1. 3
Add Cameras Manually
If the devices cannot be automatically found by the NVR, you can add cameras manually using its
information. Follow the steps below to finish the configuration.
1. Right click on the Live View screen and click
right click on the screen and click
Access
>
Add
Device.
2. Click
Add
Manually.
Add Camera
Settings
in the pop-up Main Menu, then go to
Configure Your Network Camera
in the pop-up Main Menu. Alternatively,
Camera
>
Device
30