Subscribe to Our Youtube Channel
Related Manuals for Clenergy PV-ezRack SolarRoof Isolator Shade
Summary of Contents for Clenergy PV-ezRack SolarRoof Isolator Shade
- Page 1 PV-ezRack SolarRoof Isolator Shade Installation Guide Code-Compliant Planning and Installation Guide V1.0 Complying with AS/NZS 5033: 2014 AMDT 2: 2018...
- Page 2 Introduction 1. Introduction The installer is solely responsible for: Clenergy PV-ezRack SolarRoof Isolator Shade is an accessory in the PV-ezRack roof-top PV- • Complying with all applicable local or national mounting system, suitable for PV array AC/ building codes, including any that may DC isolators.
- Page 3 Note: Angle Bracket is an optional component when fixing the Isolator Shade at the end of rail. page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 4 Note: For the Isolator Shade (black anodized), lock washers (no. 5 in the image above) are required to achieve earthing continuity. page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 5 Note: For the Isolator Shade (black anodized), lock washers (no. 5 in the image above) are required to achieve earthing continuity. page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 6 （5（Avoid working at high temperatures. 3.2.3 Safe Torques Please refer to safe torques defined in this guide. page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 7 Recommended torque for M6 bolts is 4-5 N·m, which allows for optimal opening and closing of the isolator cover. M6*14 Figure 1 page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 8 Recommended torque for M8 bolts is 4-5 Nm. Figure 4 4.1.5 After cable installation, close the Isolator Cover (Figure 5). Figure 5 page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 9 Isolator Shade according to the Isolator Installation Guide as shown in the Figure 7. Figure 7 page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 10 After cable installation, close the Isolator Cover as shown in the Figure 9. Figure 9 page of 09 Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia Tel: +61 3 9239 8088 Fax: +61 3 9239 8024 E-mail: tech@clenergy.com.au www.clenergy.com.au...
- Page 11 Tel: +66 63 228 0200, +66 81 969 5152 E-mail: sales_th@clenergy.com,support_th@clenergy.com Clenergy Singapore 24 Raffles Place #28-01 Clifford Centre Singapore 048621 Tel: +65 9743 1425 E-mail: vincent.chan@clenergy.com Clenergy Vietnam Tel: +86 592 3110095 Warranty E-mail: sales_vietnam@clenergy.com; susie.chen@clenergy.com; ducnguyen@clenergy.com Clenergy Installation Guide PV-ezRack SolarRoof Isolator Shade 201911...
Need help?
Do you have a question about the PV-ezRack SolarRoof Isolator Shade and is the answer not in the manual?
Questions and answers