Two-Piece Lever (Nominal (Rated) Torque 200 N@M); Three-Piece Lever (Nominal (Rated) Torque 500 N@M, 1 Kn@M) - HBM TTS Mounting Instructions

30

4.2.2 Two-piece lever (nominal (rated) torque 200 N@m)

• First join the parts of the lever together by pushing the longer piece into the
shorter one.
• Fit the lever and the measuring head, as described in sub-section 4.2.1 .
Fig. 4.11: Two-piece lever

4.2.3 Three-piece lever (nominal (rated) torque 500 N@m, 1 kN@m)

• First attach the connection bolt of the lever with the two supplied hexagon-
socket screws (a./f. 5) in the measuring head.
• Push the center piece over the connection bolt and tighten the knurled
screw.
• Now push the end piece into the center piece and turn the knurled screw
tight.
Connection bolt
Fig. 4.12: Three-piece lever (500 N@m, 1 kN@m)
HBM
Spring bolt
Center piece
Spring bolt
TTS
End piece
A1571-1.2 de/en