Page 2
STEP PLEASE NOTE THAT YOU WILL NEED A SECOND ETHERNET / LAN CABLE VERY IMPORTANT: DO NOT REMOVE LAN CABLE CONNECTED BETWEEN YOUR ROUTER’S WAN PORT AND THE ONU Connect your router to your computer STEP STEP Insert the one end of the LAN cable into one of Insert the other end of the LAN cable into the the LAN ports on the back of the router LAN port on your computer...
Page 3
STEP STEP Open your web browser and type in the router IP address into the URL Please be sure not to Google the IP address, but type it into the URL as shown...
Page 4
STEP Enter default username & password STEP STEP The “USER LOGIN” window can now be seen. The User Name and Passwords are: admin (lowercase)
Page 5
STEP You will now be on the EASY SETUP window: Go to “ADVANCED SETUP” to enable the remote management STEP STEP STEP You will find the Advanced Setup option on the top right hand corner of the screen. Click the box “Enable Web Server Access on WAN” Repeat Steps 3.1 and 3.2 STEP...
Page 6
STEP You will now again be on the EASY SETUP window: Change the WAN Connection Type to “PPPOE” and fill in the username and password...
Page 7
STEP STEP You now have the option to change your Network Name (SSID) and password to what you would prefer Your Chosen SSID Password Your Chosen SSID Password IMPORTANT: CLICK “APPLY” WHEN DONE TO SAVE CHANGES...
Need help?
Do you have a question about the A3002RU-V2 and is the answer not in the manual?
Questions and answers