Charging The Unit - Daymak BOOMERBEAST 2.0 STANDARD User Manual

Charging the unit

After using your Boomerbeast, you will need to charge the unit. The Boomerbeast comes with a charger
that you can use to plug into a regular outlet. (The deluxe unit charger looks di erent slightly but functions
the same way).
If you are sitting on the Boomerbeast on underneath the seat between your legs you can nd the charging
port.
Please note - You can charge the unit at any point of its usage. You do not need to let the unit run
fully down before charging it again and does not count as a full cycle of the battery.
When the charger is plugged in the wall and not into the
unit the light will appear green. Then plug the charger into
the charging port as seen below. The charger LED will turn
red.
After the unit is fully charged the charger will turn green
again and you can unplug the unit.
*PLEASE NOTE* Do not leave the charger plugged in for
extended periods of time after it is nish as it will ruin
the battery life and can possibly become a re hazard.
11