Charging Your Photon - Daymak Photon Standard User Manual

Charging your Scooter
In order to prevent overcharging the battery for your scooter, follow the chart below.
Please note that power use depend on the rider and recommended time for charging are
averages.
SCOOTER USE TIME (BATTERY DISCHARGE TIME)
0 - 20 minutes
20 - 30 minutes
30+ minutes
Locate the charger socket beneath the fl oor panel near the right side (SEE FIGURE1). Plug
the charger into the charger socket, then plug the other end into a standard 110/220v wall
outlet. It is advised to charge your scooter only when the power is turned o .
POWER SWITCH
Removable Floor Panel
The fl oor panel is removable to gain access to the batteries. Simply remove four screws
with a Phillips screw driver (SEE FIGURE2) and lift the platform. Take care not to sever or
damage any wired connections from the solar panel.
FIGURE1
FIGURE2
REMOVE SCREWS WITH PHILLIPS SCREWDRIVER
CHARGING TIME
4 - 6 hours
6 - 8 hours
8 - 10 hours
CHARGER PORT
9