Daymak BOOMERBEAST 2.0 STANDARD User Manual page 10

Boomerbeast Operation (cont'd)
You will nd above the ignition a display that will show you your metrics and performance for your Boomer-
beast.
Display
1) Speed - This display shows you how fast you
are going in km/h
2) Motor Power - This meter shows how much
power is being drawn from the motor. The
more power being drawn the faster the your
battery will drain.
3) Odometer - This shows how many kilome-
ters you have travelled on this unit.
4) Battery Meter - This shows how much
power you have left before you need to charge.
Once you start getting below 50% its advisory
to get to a charging station.
*PLEASE NOTE* The battery meter will dip
down when it starts and then go back up to
a steady power level. This is normal.
Boomerbeast D - Motor Switch
If you have the Boomerbeast D, on the left
handlebar you will also nd a green switch like
the one to the right. This changes it from dual
or single motor.
Put this switch up to engage just the rear
motor or down to engage both front and
rear motors.
*PLEASE NOTE* The battery will draw expo-
nentially faster with both motors running
and all range estimates are for single motor
use only.
10