Juniper SRX300 Hardware Manual page 55

Copyright © 2019, Juniper Networks, Inc.
root# set system root-authentication plain-text-password
New password: password
Retype new password: password
Configure an administrator account on the device.
6.
[edit]
root# set system login user admin class super-user authentication plain-text-password
Commit the configuration to activate it on the device.
7.
[edit]
root# commit
Log in as the administrative user you configured in Step 6.
8.
Configure the name of the device. If the name includes spaces, enclose the name in
9.
quotation marks (" ").
configure
[edit]
admin# set system host-name host-name
NOTE: For information on the factory-default settings, see
SRX300 Services Gateway Factory-Default Settings" on page
Configure the traffic interface.
10.
[edit]
admin# set interfaces ge-0/0/1 unit 0 family inet address address/prefix-length
Configure the default route.
11.
[edit]
admin# set routing-options static route 0.0.0.0/0 next-hop gateway
Configure basic security zones and bind them to traffic interfaces.
12.
[edit]
admin# set security zones security-zone untrust interfaces ge-0/0/0
admin# set security zones security-zone trust interfaces ge-0/0/1
admin# set security zones security-zone trust interfaces ge-0/0/1.0
host-inbound-traffic system-services all
admin# set security zones security-zone trust interfaces ge-0/0/1.0
host-inbound-traffic protocols all
Chapter 3: Initial Installation and Configuration
"Understanding
48.
55