Related Manuals for dallmeier DF4900HD
Summary of Contents for dallmeier DF4900HD
- Page 1 Installation and Configuration English High Definition IP Box Camera DF4900HD 1080p DF4500HD 720p Rev. 1.0.2 / 2010-08-12...
- Page 2 Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.
-
Page 3: Table Of Contents
DF4900HD / DF4500HD Table of Contents 1 Introduction ....................5 Validity ......................5 Documents ......................5 Conventions ....................6 2 Safety Instructions..................7 3 General Notes....................9 Scope of Delivery ....................9 Transportation and Packaging ................9 Appropriate Use ....................9 Performance Features ..................9 Warranty .......................10 Approvals/Certifications ................10 4 Requirements ....................11 General ......................11 Power Supply ....................11 Operation ......................11 5 ... - Page 4 DF4900HD / DF4500HD Alarm Hosts ....................29 9.2.1 Settings ......................29 9.2.2 Messages......................30 9.2.3 Scheduler ......................30 9.2.3.1 Week Timer ....................30 9.2.3.2 Exceptions ....................32 9.2.3.3 Copy Exceptions ...................34 9.2.4 Copy......................35 9.2.5 Delete Alarm Host Entry................36 Video Streaming ...................37 9.3.1 Transfer Protocol and Format ...............37 9.3.2 Transfer Method ....................38...
-
Page 5: Introduction
1.1 Validity This document applies to the following High Definition IP box cameras: • DF4900HD • DF4500HD The descriptions in this document are based on the software version 4.1.0 and apply to all above-mentioned device variants. If text passages require distinctions to be made between the device variants, the complete product names will be mentioned. -
Page 6: Conventions
DF4900HD / DF4500HD 1.3 Conventions This document contains various warning words and symbols that indicate potential sources of danger. DANGeR DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 7: Safety Instructions
System components Only use internal components that have been tested and approved by Dallmeier. Inappro- priate internal components can cause malfunctions, damages and data loss and can result in loss of warranty. - Page 8 DF4900HD / DF4500HD Burnt smell If you notice burnt smell or formation of smoke from the unit, immediately disconnect it from the power supply (pull out the power plug). Contact the sales partner responsible for your area. opening The housing of the unit may only be opened by qualified personnel for commissioning, inspection, maintenance and repair.
-
Page 9: General Notes
3.2 Transportation and Packaging Store the original packaging for transportation at a later date. Dallmeier electronic is not responsible for damage resulting from unprofessional/improper transportation. The goods should only be shipped in their original packaging. If the original packaging is no longer available, ensure that the packaging used sufficiently protects the unit against damage, moisture, heat and cold. -
Page 10: Warranty
3.5 Warranty The terms and conditions valid at the signing of the contract shall apply. 3.6 Approvals/Certifications Following approvals/certifications were valid at the time of document compilation. Refer to www.dallmeier.com for possible updates. • CE • DIN 50130-4 compliant www.dallmeier.com... -
Page 11: Requirements
DF4900HD / DF4500HD 4 Requirements 4.1 General Unfavourable local conditions may shorten the life of the product and can cause malfunc- tions or damages. Do not install/operate the device in places • with large scale dust and dirt. • with steam or oil vapours (e.g. kitchen). -
Page 12: Views And Connection Assignment
DF4900HD / DF4500HD 5 Views and Connection Assignment ¼" tripod socket (on top and bottom side) for camera mounting CS lens mount and back focus adjustment ring Locking screw (focal length) Locking screw for back focus adjustment ring (M4×4 hexagon socket screw, Locking screw wrench size 3) -
Page 13: Installation And Commissioning
DF4900HD / DF4500HD 6 Installation and Commissioning Installation and commissioning of the unit may only be carried out by qualified personnel. WARNING electric shock hazard Danger of death or serious injury Disconnect the power supply unit from the mains socket before connect- ing the device. -
Page 14: Installation And Commissioning
DF4900HD / DF4500HD 6.2 Installation and Commissioning The camera has a ¼" tripod socket located on the top and bottom side. Notice Damage to the device by inappropriate mounting equipment Use the correct type of of mounting equipment: • ¼" tripod screw (max. length 7 mm) for ceiling/wall bracket • Weather-proof housing for outdoor installations ... - Page 15 DF4900HD / DF4500HD Loosen the locking screw of the back focus adjustment ring. Set the optimum focus with the back focus adjustment ring. You may need to repeat the last 4 steps several times to obtain the best results. Tighten the locking screw of the back focus adjustment ring.
-
Page 16: Connection And Login
• a more powerful PC is required if several devices are configured with live video display simultaneously. • a DirectX compatible graphics card and the Dallmeier control for ActiveX are not re- quired for the configuration without live video display. - Page 17 DF4900HD / DF4500HD The connection to the device is established. The graphical user interface (GUI) of the live mode is displayed. Fig. 7-1 Live mode with adjustable video resolution A Hide/show title bar B Switch between live and configuration mode C Live video...
-
Page 18: Login
Change the factory default password as soon as possible. Click coNFiG in the user interface of the live mode. The login dialogue is displayed. Fig. 7-2 Enter the Username if required. Enter the Password. Confirm with oK. Dallmeier Video Protocol www.dallmeier.com... - Page 19 DF4900HD / DF4500HD The graphical user interface of the configuration mode is displayed. Fig. 7-3 Configuration mode A Hide/show title bar B Switch between live and configuration mode C IP address of device D Log out of configuration mode e Disable/enable live video display...
-
Page 20: Basic Settings
DF4900HD / DF4500HD 8 Basic Settings The basic settings and the user management are integrated in the common settings menu. 8.1 Language The graphical user interface can be displayed in various languages. Open the User interface dialogue via common settings > User interface .. -
Page 21: Manual Configuration
DF4900HD / DF4500HD 8.2.1 Manual Configuration Note that no manual configuration is possible if the UTC time server synchronization is enabled. Select the Date/time tab. Fig. 8-3 Set the Date. Set the time. Confirm with oK. 8.2.2 Time Server Note that the time server must always be accessible via the network. -
Page 22: Camera Name
The authentication with the group password is also possible in “User login” mode. Open the Login options dialogue via common settings > User management > Login options ..Fig. 8-6 Set the Login mode. Confirm with oK. Dallmeier Video Management Software www.dallmeier.com... -
Page 23: User Groups
DF4900HD / DF4500HD 8.4.2 user Groups The group names of the three user groups can be changed. Note that • the factory default password of Group 1: admin is “3”. • the factory default password of Group 1: admin must be changed for security reasons. -
Page 24: User
DF4900HD / DF4500HD 8.4.3 user In the “User login” mode, individual users can be assigned to the three user groups. 8.4.3.1 Define a user Ensure that the Login mode is set to User login. Open the User groups dialogue via common settings > User management > User groups .. -
Page 25: Edit User
DF4900HD / DF4500HD 8.4.3.2 edit user Ensure that the Login mode is set to User login. Open the User groups dialogue via common settings > User management > User groups .. Select the tab of the relevant group. Select the relevant user from the users list. - Page 26 DF4900HD / DF4500HD The various rights are displayed each in a line. The permission level of each user group is displayed with a symbol in the corresponding column. Symbol Tool tip Right The dialogue will be displayed. allow The settings can be changed.
-
Page 27: Network
DF4900HD / DF4500HD 9 Network 9.1 Basic Settings The network settings of the device can be configured manually or automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server. In order to avoid network conflicts, you should clarify if intended network settings are per- mitted. -
Page 28: Manual Configuration
The newly assigned IP address can be determined by the MAC address of the device with the IP-Finder or at the DHCP server. The IP-Finder must be executed in the same LAN where the device is located. IP-Finder: Dallmeier software for determination and configuration of network-compatible Dallmeier devices www.dallmeier.com... -
Page 29: Alarm Hosts
Confirm with oK. The item in the configuration menu and the title of the dialogue is automatically updated with the entered alarm host name after saving the settings. Dallmeier Video Protocol Dallmeier evaluation and management software for messages www.dallmeier.com... -
Page 30: Messages
DF4900HD / DF4500HD 9.2.2 Messages Select the Messages tab. Fig. 9-3 Select all relevant messages which should be sent out by activating the related check- box. Confirm with oK. 9.2.3 Scheduler The scheduler function allows scheduling the messaging function. - Page 31 DF4900HD / DF4500HD Light gray areas in the week timer represent active periods. During active periods the messaging function is enabled. By default, the entire period in the week timer is active. Select Inactive Periods Click inactive. In the week timer, click and hold the left mouse button and draw a rectangle over a relevant period.
-
Page 32: Exceptions
DF4900HD / DF4500HD 9.2.3.2 exceptions For days with deviations, exceptions can be defined. Note that exceptions will overwrite the settings of the entire relevant day in the week timer. Select the exceptions tab. Fig. 9-6 Click New ..The calendar is displayed. - Page 33 DF4900HD / DF4500HD Fig. 9-8 Dark gray areas in the timetable represent inactive periods. During inactive periods the messaging function is disabled. By default, the entire period (24 hours) in the timetable is inactive. Select Active Periods Click active. In the timetable, click and hold the left mouse button and draw a rectangle over a rel- evant period.
-
Page 34: Copy Exceptions
DF4900HD / DF4500HD Delete Active Periods Click inactive. In the timetable, click and hold the left mouse button and draw a rectangle over an ac- tive period. Release the mouse button. Repeat the last two steps until all relevant active periods are deleted. -
Page 35: Copy
DF4900HD / DF4500HD The new date with the copied exception settings is added to the exceptions list. Fig. 9-11 To delete exceptions, select the relevant date in the exceptions list and click “Delete”. Confirm with oK if you do not want to make any additional settings. -
Page 36: Delete Alarm Host Entry
DF4900HD / DF4500HD Fig. 9-13 Customize the relevant settings. Finally confirm with oK. 9.2.5 Delete Alarm Host entry To delete an alarm host entry, proceed as follows: Click Network > Alarm hosts. Select the alarm host entry to be deleted from the configuration menu. -
Page 37: Video Streaming
The video streaming function provides the streaming of audio and video data to the net- work without requesting the data actively with a RTSP (Real Time Streaming Protocol) or DaVid Protocol capable client (e.g. Dallmeier recorder or PView). Note that the format of the RTP payload to be transported must correspond with the encod- ing standard. -
Page 38: Transfer Method
DF4900HD / DF4500HD The transfer format defines the RTP payload to be transported. RTP/H264 The video data is packetized by the Real-Time Transport Protocol (RTP) for a H.264 Video Elementary Stream. Audio data is not transferred. The data must be encoded to H.264 format. -
Page 39: Ttl
DF4900HD / DF4500HD 9.3.3 The TTL value (Time To Live) defines the lifetime of an IP packet. Every router an IP packet passes through reduces the time to live value by one (1). If the value is zero (0), the IP packet is discarded. -
Page 40: 10 Video
DF4900HD / DF4500HD 10 Video 10.1 Video Standard Countries and territories use different broadcasting television systems. To ensure a correct video signal transmission, the appropriate video standard for your country must be set at the device: • HD 25/50 fps for “PAL countries”... -
Page 41: Global
DF4900HD / DF4500HD Note the explanations below. Set the relevant options. Finally confirm with oK. You can restore the factory sensor settings at any time by clicking “Default”. 10.2.1 Global In the Global tab, the following settings can be configured:... -
Page 42: Encoder Settings
Note that the camera can be recorded in the “Motion” recording mode (image comparison) by Dallmeier recorders of the DMS and VNB series (as of version 7.1.1). For this, the Encoder 1, which has to be set to H.264 encoding, is used. Encoder 2 and 3 are automatically disabled. - Page 43 DF4900HD / DF4500HD Noise Filter This function can improve the image quality by noise reduction and therefore enhance the compression performance. Note that this function is not effective with resolutions higher than 720p. Spatial (2D) • Compares surrounding pixels within a frame •...
-
Page 44: Encoder 2
DF4900HD / DF4500HD Variable bit rates make better use of the available hard disk space. GoP-size The GOP-size (Group Of Pictures) specifies how images are used to generate the H.264 data stream. The higher the GOP-size is, the better the image quality. However, a higher GOP-size will also result in an increase in the delay. -
Page 45: Audio
DF4900HD / DF4500HD Fig. 10-6 If required, activate the Use encoder checkbox to enable Encoder 3. Select the required settings (see section “Encoder 1” on page 42). Confirm with oK. 10.3.4 Audio Audio encoding is not supported in this software version. -
Page 46: 11 Interfaces
DF4900HD / DF4500HD 11 Interfaces 11.1 Data Display The data display function provides the embedding of data transferred from external de- vices/applications (via DaVid Protocol). The embedded data is displayed in live mode of DaVid Protocol capable devices/applica- tions. A recording of the embedded data has to be configured separately. For detailed information refer to the separate documentations. -
Page 47: Position
..Fig. 11-2 The right-hand side of the dialogue (blue rectangle with Dallmeier logo) represents a screen for displaying live videos with full “PAL” or “NTSC” resolution. The white lines illustrate the stylized graphical user interface (GUI) of a typical application for displaying live videos. - Page 48 DF4900HD / DF4500HD The display area can be resized by dragging its yellow corner (in the bottom right). Fig. 11-4 An exact positioning and resizing is possible by using the corresponding input fields. Adjust all relevant settings. Confirm with oK.
-
Page 49: 12 Service And Info
Activations The Activations dialogue allows you to activate possible extra features. For information about available extra features contact the Dallmeier Support. For purchasing activation codes, contact the Dallmeier Sales Department. Open the Activations dialogue via Service > Activations .. -
Page 50: Configuration File
DF4900HD / DF4500HD 12.3 Configuration File The configuration of the device can be exported to a file and thus be saved. In addition to recover the configuration of the device that is currently connected, the con- figuration can also be transferred to several devices simultaneously. -
Page 51: Configuration Recovery
DF4900HD / DF4500HD 12.3.2.1 Configuration Recovery To recover the configuration of an individual device, the connection to the device must be established first (see section “Connection” on page 16). Open the configuration file management dialogue via Service > configuration file > Upload .. - Page 52 DF4900HD / DF4500HD Fig. 12-5 Click Browse…. Select the relevant configuration file on your data storage device. Activate the Broadcast checkbox. Enter the First iP address and the Last iP address of the relevant device group. Enter the Username.
-
Page 53: Info
DF4900HD / DF4500HD 12.4 Info General information about the device is displayed in the info dialogue Click info … in the configuration menu. Fig. 12-6 The following information is displayed: • Device type • Software version number of the device • Version number of the encoder •... -
Page 54: 13 Image Transmission
DF4900HD / DF4500HD 13 Image Transmission The device can be configured as active network component for streaming of audio and video data (see section “Video Streaming” on page 37). In addition the device, as a passive network component, can be triggered for transmission of audio and video data via various transport and data protocols by external devices and applications. - Page 55 DF4900HD / DF4500HD Use the following retrieve expression for the various encoders: encoder 1 rtsp://IP address of the device/encoder1 rtsp://IP address of the device/encoder2 encoder 2 rtsp://IP address of the device/encoder3 encoder 3 Encoder 1, 2 and 3 can be retrieved by three applications simultaneously. This allows real- izing a “Tri-Streaming”...
-
Page 56: 14 Maintenance
If it’s necessary to clean the device, observe the following notes: Notice Damage to the surface of the device Clean the housing (outside) with a soft, dry and antistatic cloth. Do not use detergents. Damage to the sensor Only use approved methods and products for sensor cleaning. For more information contact the Dallmeier Support. www.dallmeier.com... -
Page 57: 15 Pin Assignment
DF4900HD / DF4500HD 15 Pin Assignment 15.1 DC Auto Iris Interface Fig. 15-1 Pin No. Assignment Control − Control Drive Drive − 15.2 LAN/Poe RJ45 jack Fig. 15-2 10BASE-T-/100BASE-TX-PoE PoE conformity IEEE 802.3af www.dallmeier.com... -
Page 58: Audio Out
DF4900HD / DF4500HD 15.3 Audio ouT 3.5 mm phone jack Fig. 15-3 Line-out, mono Signal GND Ground 15.4 Power IN 12 V DC (+) 12 V DC (−) Weidmüller male connector SL 3.50/02/90G Fig. 15-4 In order to comply with the UL requirements, you have to use a UL-certified, limited power source (LPS) Class 2 power supply unit. -
Page 59: 16 Technical Data
H.264, MJPEG HD Standards DF4900HD: SMPTE 296M, SMPTE 274M DF4500HD: SMPTE 296M Resolution DF4900HD: SD, HD (720p, 1080p, 3MP) DF4500HD: SD, HD (720p, 2MP) Frame rate Up to 30 fps Video Bit Rate Up to 8 Mbps (4 Mbps typical) - Page 60 DF4900HD / DF4500HD Interfaces Video OUT 1× BNC (CVBS, analogue SD video preview output, for local installation only) Audio OUT 1× 3.5 mm phone jack (Line-Out, mono) Ethernet 1× RJ45, 10BASE-T-/100BASE-TX-PoE Ethernet Protocols DHCP, HTTP, UDP, UPnP, FTP, SMTP, RTP Local Video Memory Via integrated SDHC card slot Further Specifications...
-
Page 61: 17 Technical Drawings
DF4900HD / DF4500HD 17 Technical Drawings Following technical drawings were valid at the time of document compilation. Refer to www.dallmeier.com for possible updates. Fig. 17-1 Fig. 17-2 www.dallmeier.com... - Page 62 IP Network Box Camera Type: DF4900HD / DF4500HD Hereby the equipment is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC).