Pairing A Vp3600 And An Ios Device - IDTECH VP3600 User Manual

3.5.4. Pairing a VP3600 and an iOS device

Note: iOS devices do not require pairing with a VP3600; the iOS device's Bluetooth list does not
display a VP3600's Bluetooth name. The steps below describe connecting the two devices.
1. Download the iOS SDK for NEO 2 products .ZIP file
the NEO 2 Demo app (NEO2.ipa) onto your iOS device.
2. Power on the VP3600.
Enter a new password for the device by using the Set Bluetooth Parameters (77-81)
3.
command, described above. The VP3600's default password is 123456.
4. Open your iOS device's settings app.
5. Turn Bluetooth on.
6. Open the NEO 2 Demo app.
Enter the VP3600's Bluetooth name (the default name is IDTECH_BLE) in the upper-right
7.
corner and tap Start BLE Scan in the upper-left corner.
8. Enter the VP3600's password, then tap Pair to pair the device. When the VP3600 is
connected successfully, the Disconnected text changes to Connected and the VP3600's LED
display shows the Bluetooth icon. You can now send commands and receive responses.
VP 3600 User Manual
from the VP3600 product page and load
Page | 12