Graco Husky 2150e Operation Manual page 5

THERMAL THERMAL THERMAL EXPANSION
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure
due to the thermal expansion. Over-pressurization can result in equipment rupture and serious
injury.
• Open a valve to relieve the fluid expansion during heating.
• Replace hoses proactively at regular intervals based on your operating conditions.
PLASTIC PLASTIC PARTS PLASTIC
Many solvents can degrade plastic parts and cause them to fail, which could cause serious
injury or property damage.
• Use only compatible water-based solvents to clean plastic structural or pressure-containing
parts.
Technical Data
• See Technical Technical
solvent manufacturer's Safety Data Sheet (SDS) and recommendations.
TOXIC FLUID FLUID OR
TOXIC TOXIC FLUID
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
• Read Safety Data Sheet (SDS) to know the specific hazards of the fluids you are using.
• Store hazardous fluid in approved containers, and dispose of it according to applicable
guidelines.
BURN BURN HAZARD BURN HAZARD HAZARD
Equipment surfaces and fluid that's heated can become very hot during operation. To avoid
severe burns:
• Do not touch hot fluid or equipment.
PERSONAL PROTECTIVE
PERSONAL PERSONAL
Wear appropriate protective equipment when in the work area to help prevent serious injury,
including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective
equipment includes but is not limited to:
• Protective eyewear, and hearing protection.
• Respirators, protective clothing, and gloves as recommended by the fluid and solvent
manufacturer.
3A4068H
WARNING
EXPANSION HAZARD EXPANSION HAZARD HAZARD
PARTS CLEANING PARTS CLEANING SOLVENT CLEANING SOLVENT HAZARD SOLVENT
Data in this and all other equipment instruction manuals. Read fluid and
Data
OR FUMES FUMES HAZARD HAZARD
OR FUMES HAZARD
PROTECTIVE EQUIPMENT EQUIPMENT
PROTECTIVE EQUIPMENT
HAZARD HAZARD
Warnings
5