Wall plate control panel description, wiring hookup diagrams
RED LEDs (4): Indicate mode
is in use
ON: Turns system power
on when pressed.
SEARCH: Acquires GPS
signal and locates desired
satellite signal.
LED also lights when dish
is moving.
Interior connections for one and two receivers
ONE RECEIVER HOOKUP
Bundled coax
coming into
vehicle
Primary
"Bright White"
coax, to receiver
Wall Plate
Control Panel
•
TV set out
Sat In
•
Receiver
TV
WINEGARD
ON
SEARCH/
MOVING
SATELLITE SYSTEM
+13.8 VDC Power
Connections
Secondary coax
(almond), not used for
single receiver setup
9-wire cable, put into har-
ness connector for
installation to back of
wall plate control panel
OFF
PARK
AS-2003
TWO RECEIVER HOOKUP
Bundled coax
coming into
vehicle
Primary "Bright White"
coax, connect to
main receiver
9-wire cable, put into har-
ness connector for
installation to back of
wall plate control panel
•
Sat In
Main
TV
5
OFF: Turns system power
off when pressed.
PARK: Puts dish in park
position.
+13.8 VDC Power
Connections
Secondary coax
(almond), connect to
second receiver
Wall Plate
Control Panel
TV set out
Sat In
•
Primary
Receiver
•
TV set out
•
Second
Receiver
TV
2