Pressure Regulator Replacement (Lpg Version) - Planika GaLiO Fire Pit Insert User And Installation Manual

4.5.3 Pressure regulator replacement (LPG version)

1. You always need to use a pressure regulator between the gas cylinder and the device. Replace
the pressure regulator every 5 years. Allowed pressures: 30 mbar, 37 mbar (recommended), 50
mbar. Use only the redactors that comply with the EN16129 European Norm.
2. Turn off the GaLiO Fire Pit Insert – the „OFF" position. The main burner and the pilot burner need
to be turned off.
3. Disconnect the regulator from the gas cylinder (description above).
4.
Loosen the metal clamp with the use of
a screwdriver (philips) or a flat wrench.
5.
Move the clamp away from the stub of
gas regulator.
6. Take off the linkage from the stub of
regulator.
7. Attach a new linkage on the stub of
regulator.
Copyright Planika Sp. z o.o. www.planikafires.com IG0115#03 16.03.2020 14