HealthCare International PhysioStep LXT Quick Start Manual

Hide thumbs Also See for PhysioStep LXT:

Dear Valued Customer,

Thank you very much for your purchase of the PhysioStep LXT. To help

you better understand the operation of this product we would like you to

note that when you are using this product you must maintain an RPM of

at least 30 in order for it to operate correctly and have the correct readout

information.

Please reference the information below:



Select program 1 by pressing the START button once your

machine is powered on. Make sure the program is not flashing. If it is

flashing press the START button.

Press the MODE button and it will display the RPM window in



the center of your screen.



If you do not see the RPM reading change you must go faster.



If you go at or below 30 RPM you'll feel a slight hesitation. Once

you achieve a pace of 30+ RPM the slight hesitation will not be

detectable.

Once again thank you for your order and please let me know if I can be of

any further assistance. Feel free to email me anytime:

brookshci@msn.com.

Brooks Safadago

Technical Service Manager

HealthCare International

Table of Contents

Need help?

Do you have a question about the PhysioStep LXT and is the answer not in the manual?

Page 1 Dear Valued Customer, Thank you very much for your purchase of the PhysioStep LXT. To help you better understand the operation of this product we would like you to note that when you are using this product you must maintain an RPM of at least 30 in order for it to operate correctly and have the correct readout information.
Page 2 Please follow the following steps to get the PhysioStep LXT started: 1. Position yourself comfortably in the seat. 2. Move the handles to activate the console. 3. Press ENTER. 4. Input the amount of time you would like to work out for using the UP and DOWN keys in the middle of your console.