3xLogic VISIX S-Series Installation Manual page 12

Number Description
1 Lens Mount
3 ¼-20 UNC Screw Hole
5 Auto-iris Interface
7 Power Outlet
9 Micro SD Card Slot
11 Grounding
13 RX, TX: RS-232
15 IN, GND: Alarm In
17 ABF
NOTE: Press and hold RESET for 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.
The auto-iris interface is shown below:
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+ and Drive-
pins are used when the auto-iris is driven by DC.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
Installation Manual v3.1 | VISIX S-Series Network Camera
Number Description
2
4
6
8
10
12
14
16
18
Auto-iris Interface
Number DC-driven
1 Damp-
2 Damp+
3 Drive+
4 Drive-
MIC
Status Indicator
LAN(PoE)
Reset
Video Out
1A, 1B: Alarm Out
D-, D+: RS-485
Audio Out
Audio In
11