Haltech Platinum Pro Plug-in Quick Start Manual page 7

6. Calibration of the Electronic Throttle
Before trying to start the vehicle the Electronic throttle MUST be calibrated.
Calibration of the throttle is achieved by using the Haltech ECU Manager ETC
Calibration wizard located in the Advanced Tab within the Main setup page.
The process to Calibrate the Electronic Throttle is outlined below.
Install ECU into vehicle as described previously
•
With the ignition switch turned on, connect to the ECU via
•
Haltech ECU Manager Software using the USB cable provided
Navigate to the Main Setup page by pressing F4 or by using the
•
Setup / Main Setup Tabs
Go to the Advanced setup page via selecting the icon on the left of the
•
main setup page
Select Electronic Throttle Tab to display the Haltech Electronic Throttle
•
Calibration wizard, we are now ready to calibrate the throttle.
To begin the calibration process select the Start >> button
The Haltech Calibration wizard will now guide you though the Electronic
•
Throttle Calibration.
Figure 7- Main Setup Page showing Advanced Menu ETC Calibration Wizard