Advertisement
ECU Manager Software
ECU Manager software is used for setup, calibration and diagnostics and can
be found on the CD supplied with this unit or downloaded from the Haltech website
www.haltech.com
Minimum System Requirements
Operating System:
Processor Speed:
RAM:
Video Card:
USB:
Hard Drive Space:
Minimum Screen Resolution:
Installing ECU Manager
Installing ECU Manager onto your PC is performed similar to any other Windows
software package. Installation is outlined below to ensure correct installation:
1.Insert the CD-ROM into your PC's CD-ROM drive. The CD should automatically
launch into the Haltech Browser. If the CD does not run automatically double
click on the "My Computer" icon on the desktop, double click on the Haltech icon
(CD- ROM drive) to start the browser software.
2.The Browser will display the disclaimer and you will need to agree to the
terms stated before allowing to progress. Read the Disclaimer and click on
AGREE if you agree.
3.Now you will be able to access all the information contained on the CD
4.To download the Platinum Software, click on the Platinum Series ECU Manager
Link. You will be prompted to install the software. Click "Install" to install
ECU Manager and the Data Log viewer.
5. Follow the software prompts and install the software.
With your programming cable (USB) attached to your ECU and the other end
connected to your laptop, power up the ECU by turning your key to IGN. Start the
programming software on your PC and go online with the ECU.
Windows 2000 SP4 / XP / Vista / Windows 7
1GHz
256 Mb
128MB graphics card with 3D acceleration
1.1
250Mb
1024 x 768 pixels
Advertisement
