Table of Contents
Advertisement
116
4.4
Delete Method
In this function you will be prompted to know whether the current method is actually to be deleted (Fig. 60).
You have to reply «Yes» in explicit terms and also confirm this reply with <ENTER>/<OK>.
Fig. 60
4.5
Change Method Parameters
The input or modification of the method name was already described in 4.1 and 4.3
Fig. 61
Method type
4.5.1
On the «Method type» you can select whether you wish to perform a manual or automatic titration, a dosage or
whether you wish to prepare a solution.
Fig. 62
The selection of the Method type will have an influence on the further parameterisation of the method.
For instance, if you select the dosing mode, neither a selection of a formula will be available.
In addition one can also carry out a measurement:
Advertisement
Table of Contents
