Bosch TIS65 Series Instruction Manual page 12

Fully automatic espresso machine
Hide thumbs Also See for TIS65 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
en
Initial use
Setting up the appliance
■ Remove any protective plastic film.
■ Place the fully automatic coffee machine
on a level, waterproof surface that is able
to support its weight.
■ The appliance's ventilation slits must not
be covered or obscured.
F
Important: Only use the appliance
in a frost-free room. If it has been
transported or stored at temperatures
below 0°C, wait at least 3 hours
before taking it into operation.
■ Connect the power supply (cable storage
compartment 18) to the socket. You can
adjust the length of the cable by pulling it
further out or pushing it back in. To do this,
place the appliance with its back flush
with the edge of the work surface and
either pull the cable out downwards or
push it in upwards.
■ Flip up the lid of the water tank 6.
■ Remove the water tank 5, rinse it out and
fill it with fresh cold water. Do not fill it
past the "max" mark.
■ Replace the water tank 5, making sure
that it is straight, and push it right down
into place.
■ Reclose the lid of the water tank 6.
■ Fill the bean container 9 with coffee beans.
■ Use the main switch J 1 to switch on the
appliance.
The control panel and the display will
be activated. The display will show the
previously specified language, which will
also be used for all subsequent display
texts. A number of different languages are
available.
■ Touch I repeatedly until the display
indicates the desired language.
Deutsch
English
Français
■ Touch C to confirm your
selection.
8
The chosen language is now stored.
The brand logo will light up on the display 3.
The appliance will heat up and rinse itself,
a small amount of water will run out of the
drink outlet 4.
The appliance is ready for use when the
symbols and the display on the control
panel are lit.
F
The factory settings of the fully
automatic coffee machine are
programmed for optimal perfor-
mance. The appliances switches off
automatically after a configured time
(see the section "Menu – Automatic
shut-down").
F
When the appliance is used for the
first time, after a service program has
been run and when it has not been
operated for a long period, the first
beverage will not have the full aroma
and should not be consumed.
F
When the fully automatic coffee
machine is first used, you will achieve
a suitably thick and stable "crema"
only after the first few cups have
been dispensed.
F
If the appliance is in use for a long
period of time, water droplets will
form on the ventilation slits. This is
normal.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tis65621rwTis65429rwVero barista 400Vero barista 600

Table of Contents