Advertisement
Lifting the Tro-Reel unit and securing it to the brackets starting on the fixed end insulator side
5
Temporarily mount the unit on the hangers in order starting at the end. Pull
the unit with a rope, and make sure that it doesn't sag.
When a fixed end insulator is used:
●
Fixed end insulator
When a fixed end insulator (with bolt) is used:
●
How to mount the Tro-Reel unit
■
Pull down.
1. Remove the insulator from the hanger.
Bracket for hangers
Mounting direction
Tro-Reel unit
Hanger
Bracket for
hangers
Tro-Reel unit
Fixed end insulator (with bolt)
M10 Bolt for
hanger
Hanger piece
Hanger
Insulator
Insulator
Push here.
2. Fit the removed insulator into the
Tro-Reel unit and push them securely
into the hanger (as before). Failure to do
so may cause damage due to falling of
equipment.
Hanger with insulator
Pull here.
Notes
When using hangers with insulators, be sure to mount
●
two of them with close together.
Failure to do so may cause damage due to falling of
Tro-Reel unit by the damage of the hangers with insulators.
Pull here.
Special washer
Notes
Be sure to mount the special washer.
●
Failure to do so may cause damage due to falling of equipment.
How to remove the Tro-Reel unit
■
Tro-Reel unit
Grip the insulator buttons with pliers and
pull it down.
ー 32 ー
-100×50×5
46mm
Fixed end insulator
20
Close together
75
Insulator
Fixing piece
Pryor
Advertisement
