Samsung Wi-Fi Kit 2.0 User & Installation Manual page 9

F1 F2
<Connection between the Wi-Fi Kit to a system without V1 and V2>
• When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on
CAUTION
the wall.
• Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or
#24 is used, you can use any U-type terminals that meet the specifications.
• Wi-Fi Kit communication and power cables
- When installing the Wi-Fi Kit, follow the wiring specifications for the U-type terminal.
- When installing the Wi-Fi Kit with a 4-wire PVC cable, first peel off the PVC edge (approx. 30 cm).
(AWG22 recommended)
• U-type terminal specifications for the Wi-Fi Kit PCB
Max. length for communication/power cables: 50 m
• Fasten the PCB terminal with fixing screws to a torque of 6 N•cm or less. When you fasten the
screw to a torque over 6 N•cm, it may cause damage to the screw thread.
SOL OCF Wi-Fi KIT 구통신 유럽향 IBIM_EN_DB68-08417A-00_.indd 9
F1 F2
F1 F2 F1 F2
L
F E
W d2 d
24 - 16
t
F1 F2 F1
Rated Stud
Cable range
size size
AWG mm² mm² mm
0.25 0.6
1.5 3 - 3.2
- 1.65 - 0.8
F2 V1 V2 F1
V1(ORG)
V2(YEL)
Default size (mm)
t d E F W L
1.2 12
4 - 6 5 - 9 5 - 7
- 2.5 - 21.2
2019-06-21 오후 4:11:43
F2
9