Table of Contents
Advertisement
Installing the Wi-Fi Kit
6. Activate the Wi-Fi Kit.
• When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely.
• After the system operates, tracking is performed automatically.
7. Tracking
※ Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the
Wi-Fi Kit. Tracking is required to monitor or control the system air conditioner using the Wi-Fi Kit.
• The Wi-Fi Kit automatically performs tracking when activated. The (
blink while in tracking.
• When no indoor unit is detected by tracking, the (
F1
F2
V1 V2
F3 F4
attempts tracking again. In this case, make sure that the communication cables between the indoor and
outdoor units are connected properly.
• When any change in the installation of indoor and outdoor units occurs, manually run the tracking by
pressing the (SW3,
• When tracking is completed but all the connected indoor units have the central control option
CAUTION
disabled, the (
attempts the tracking again. In this case, check and change the central control option for indoor units.
When the central control option is disabled, you cannot control indoor units via the Wi-Fi Kit.
• To control indoor units by using a mobile phone, wait until the tracking is completed and then connect
the Wi-Fi Kit to a wireless router.
NOTE
• The (
) indicator does not turn off until the Wi-Fi Kit is connected to a wireless router after tracking.
10
SOL OCF Wi-Fi KIT 구통신 유럽향 IBIM_EN_DB68-08417A-00_.indd 10
-
) button inside the Wi-Fi Kit.
ⓑ
) indicator illuminates for 10 seconds and the (
) (
) indicators on the Wi-Fi Kit
) indicator blinks for 10 seconds and the Wi-Fi Kit
) indicator blinks. Then the Wi-Fi Kit
2019-06-21 오후 4:11:43
Hide quick links:
Advertisement
Table of Contents
