Initializing The User Data; Updating With A Micro Sd Card - Samsung Wi-Fi Kit 2.0 User & Installation Manual

Installing the Wi-Fi Kit

Initializing the user data

• To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the
indicators illuminate and the user data is deleted.
F1 F2 V1 V2 F3 F4

Updating with a Micro SD card

1. Create a folder named "update" in the Micro SD card. Copy the latest software image and paste it into the
folder created in the Micro SD card.
• Be sure to format the Micro SD card using FAT16 or FAT32 before creating the "update" folder.
CAUTION
2. Insert the Micro SD card into the slot of the Wi-Fi Kit.
3. Press the [Reset] button on the side of the Wi-Fi Kit.
4. The indicator (ⓓ) on the Wi-Fi Kit blinks every 2 seconds during update.
• Once the update has been successful, the indicator promptly turns on and then turns off longer.
(On: 0.2 second, Off: 2 seconds)
• The indicator blinks every 0.2 second when the update was not completed.
5. When the update has completed normally, remove the Micro SD card and then press the [Reset] button.
6. Restarting the Wi-Fi Kit after an update failure will restore the software to the previous version.
When the update failure persists, follow the instructions below:
• File checking: Change the update image (file).
• Micro SD card checking: Replace the Micro SD card.
• PBA checking: Replace the network PBA.
12
SOL OCF Wi-Fi KIT 구통신 유럽향 IBIM_EN_DB68-08417A-00_.indd 12
Type
ⓓ
Micro SD
ⓒ
Micro SDHC
Capacity File system
Max 4GB FAT16
Max 32GB FAT32
2019-06-21 오후 4:11:44