Download Table of Contents Print this page

Smartthings App; Checking The Power Connections; Setting Up And Connecting To A Wi-Fi Access Point Using Your Smartphone - Samsung Wi-Fi Kit 2.0 User & Installation Manual

For air conditioners
Hide thumbs Also See for Wi-Fi Kit 2.0:


Table of Contents

SmartThings app

To use the SmartThings app, connect the product to the network in the sequence described below.
The images shown may differ depending on your smartphone model, OS version and manufacturer.
You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the
product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.

Checking the power connections

Check if the power is connected to the product and the access point.

Setting up and connecting to a Wi-Fi access point using your smartphone

1. To connect the product to a Wi-Fi network, turn on Wi-Fi at "Settings > Wi-Fi", and then select the access
point to connect to
• Only alphanumeric characters are supported for wireless access point names (SSIDs).
If an SSID has a special character, rename it before connecting to it.
2. Turning off "SMART NETWORK SWITCH" at "Settings > Wi-Fi" on your Smartphone
• If "SMART NETWORK SWITCH" or "Adaptive Wi-Fi" is turned on, you cannot connect to the network. Be sure
to turn off these functions before connecting to the network.
• The setup may differ depending on your smartphone model, OS version and manufacturer.
3. Checking the Internet connectivity
• After connecting to Wi-Fi, check that your smartphone is connected to the Internet.
• A firewall may prevent your smartphone from connecting to the Internet. In this case, contact your
Internet service provider for troubleshooting.
SOL OCF Wi-Fi KIT 구통신 유럽향 IBIM_EN_DB68-08417A-00_.indd 13
2019-06-21 오후 4:11:44

Hide quick links:


Table of Contents

This manual is also suitable for:


Table of Contents