Advertisement
Item Description
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Torx Driver
Torx Driver
Torx Driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Battery - locate the battery on the APM board(HP P/N:852417-001). Use fingers to remove the battery and dispose of
properly.
2.
Fan - Take the FAN Module out of the Chassis and dispose of properly.
3.
Capacitors>2.5 cm - Remove the PSU from the system. With screw driver, remove the screws securing the top cover,
locate the capacitors and use a medium flat head screwdriver to remove them and dispose of properly.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1 – Battery Location
Attachment 2 – FAN Location
Attachment 3~7–Super Cap Location in PSU
Attachment1
MF877-00
Template Revision A
Notes
HPE instructions for this template are available at
Tool Size (if
applicable)
T10
T15
T20
MF877-01
Quantity
of items
included
in product
0
Page 2
Advertisement
