Troubleshooting; Technical Data; Service / Warranty - Gardena EasyCut Li Series Operator's Manual

Battery hedge trimmer
Hide thumbs Also See for EasyCut Li Series:
Table of Contents

Advertisement

3. Spray the blade with the GARDENA Cleaning Spray, Art. 2366.
Avoid contact of the oil with the plastic parts.
To clean the charging power supply:
Make sure that the contacts of the charging socket and the charging
power supply always are clean and dry before you connect the charging
power supply.
Do not use running water.
v Clean the contacts and the plastic parts with a soft and dry cloth.
4. STORAGE
To put into storage:
The product must be stored away from children.
1. Charge the battery.
2. Clean the hedge trimmer and the charging power supply
(see 3. MAINTENANCE).
3. Store the hedge trimmer and the charging power supply in a dry,
enclosed and frost-free place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household
waste. It must be disposed of in line with local environmental
regulations.
The GARDENA battery contains lithium-ion cells that
should not be disposed of with normal household waste
at the end of its life.
IMPORTANT!
v Dispose of the product through or via your municipal recycling
collection centre.

5. TROUBLESHOOTING

DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the blade to stop and slide the protective cover over
the blade before you troubleshoot the product.
Problem
Possible Cause
Hedge is not cleanly cut
Blade is blunt or damaged.
Hedge trimmer does not
Under voltage.
start. Charging control
;
lamp
flashes green
Hedge trimmer does not
Battery overload.
start. Charging control
;
lamp
flashes red
Blade is blocked.
Battery temperature is out of
range.
(Lc)
Power LED
on the
Charging power supply is not
charging power supply
plugged in correctly.
does not illuminate
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.

6. TECHNICAL DATA

Battery Hedge Trimmer
Unit
Strokes
1/min
Length of blade
cm
Tooth gap of blade
mm
Weight
kg
Sound pressure level L
1)
dB(A)
pA
Uncertainty k
pA
Sound power level L
:
2)
WA
measured/guaranteed
dB(A)
Uncertainty k
WA
10
Li-ion
Remedy
v Let the blade be replaced by
the GARDENA Service.
v Charge the battery.
v Release the start levers.
Start again.
v Remove the obstacle.
Start again.
v Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
v Plug the charging power
supply into a wall outlet.
Value (Art. 9836)
2400
40
16
2.2
75
3
85 / 91
6
Battery Hedge Trimmer
Unit
Hand/arm vibration a
1)
m/s
2
vhw
Uncertainty k
a
Measuring process complying with:
EN 60745-2-15
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of expo-
sure. The vibration emission value can vary during actual use of the electric power tool.
Battery
Unit
Battery voltage
V (DC)
Battery capacity
Ah
Battery charging time
min.
80 % / 100 % (approx.)
Charging Power Supply
Unit
Mains voltage
V (AC)
Mains frequency
Hz
Rated Power
W
Output voltage
V (DC)
Max. output current
mA
7. ACCESSORIES
GARDENA Charging Power
Charger to charge the internal batteries. Art. 9836-00.610.00 EU,
Supply
GARDENA Cleaning Spray
Extends the life of the blade and the
battery idling time.

8. SERVICE / WARRANTY

Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services
provided.
GARDENA Manufacturing GmbH grants a warranty for all original
GARDENA new products for two years from the date of original purchase
from the retailer, provided that the devices have been for private use only.
This manufacturer's warranty does not apply to products acquired second
hand. This warranty includes all significant defects of the product that can
be proved to be material or manufacturing faults. This war ranty is fulfilled
by supplying a fully functional replacement product or by repairing the
faulty product sent to us free of charge; we reserve the right to choose
between these options. This service is subject to the following provisions:
• The product has been used for its intended purpose as per the
recommendations in the operating instructions.
• Neither the purchaser nor a third party has attempted to open or
repair the product.
• Only Original GARDENA replacement parts and wear parts have
been used for operation.
• Presentation of the receipt.
Normal wear and tear of parts and components (such as blades, blade
fixing parts, turbines, light bulbs, V-belts / toothed belts, impellers, air
filters, spark plugs), visual changes, wear parts and consumables are
excluded from the warranty.
This manufacturer's warranty is limited to replacement and repair of prod-
ucts in accordance with the abovementioned conditions. The manufactur-
er's warranty does not constitute an entitlement to lodge other claims
against us as a manufacturer, such as for damages. This manufacturer's
warranty does not, of course, affect statutory and contractual warranty
claims against the dealer / retailer.
The manufacturer's warranty is governed by the law of the
Federal Republic of Germany.
In case of a warranty claim, please return the faulty product, together
with a copy of the receipt and a description of the fault, with postage paid
to the service address.
Consumables:
The blade and excentric drive are consumables and are not included in the
warranty.
Value (Art. 9836)
< 2.5
1.5
RL 2000/14/EC
2)
Value
14.4
2.0
160 / 200
Value
(Art. 9836-00.610.00 EU, 9836-28.610.00 UK)
100 – 240
50 – 60
15
18.5
600
9836-28.610.00 UK
Art. 2366

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easycut li-14/4098369836-289836-20

Table of Contents