Winco 8500 Customer Instructions

8500-8510
Treatment Table
have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377 PLEASE READ
AND FAMILIARIZE YOURSELF WITH before attempting to use this product; otherwise injury may occur. ALL INSTRUCTIONS
BEFORE USING THIS PRODUCT.
injury caused by improper assembly, installation, use, or maintenance of these products.
1.
READ AND FOLLOW ALL DIRECTIONS.
2.
NEVER stand on table or INJURY MAY OCCUR.
allow user to sleep unattended on table or INJURY MAY OCCUR.
4.
NEVER leave an unconscious user unattended on table or INJURY MAY OCCUR.
5.
DO NOT use table for transporting user in or with ANY type of vehicle or trailer. Winco tables have not been tested
or approved for use by an occupant in any type of vehicle or trailer.
6.
NEVER leave an infant or child unattended on table or INJURY MAY OCCUR.
7.
DO NOT put hands, feet or clothing into any openings when changing positions on table. Attendant MUST confirm
that users hands and feet are safe while changing table positions or INJURY MAY RESULT.
Periodically, recheck tightness of all nuts, bolts and screws.
9.
USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
10.
NEVER EXCEED the recommended weight capacity of 400 lbs. (181.4 kg).
11.
SAVE THESE INSTRUCTIONS for future reference and training.
Tools needed:
•
Phillips-head screwdriver
• 7/16" wrench (multiple size wrench included)
•
Scissors or box cutter
•
- If using powered tools always start hardware together by hand first & wear safety goggles
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
SEE "Parts Reference" (pg.3) for visual reference during assembly.
1. After checking your product for any shipping damage, table needs to be positioned upside-down on cardboard
or protective surface. Remove all packing material and hardware that was secured for shipping. Cut tape on
corners of box so that cardboard will lay flat while you assemble table.
2. You will find two Table Legs, in-between and attached to the Table Frame Rails. Pivot up the (2) Table Legs.
006060
8500-8510 Weight Capacity = 400 lbs. (181.4 kg.)
Revision Y Date 06-27-13
CUSTOMER INSTRUCTIONS
Winco assumes no responsibility for damage or
3. NEVER
Page 1 of 5
If you
8.
JWC