VERITAS NetBackup 5330 Hardware Service Procedure page 4
Replacing a fan canisterin a primary storage shelf or an expansion storage shelf
Hide thumbs
Also See for NetBackup 5330:
- Installation manual (102 pages) ,
- Appliance hardware installation manual (90 pages) ,
- Configuration manual (63 pages)
Advertisement
To install a fan canister
1
Slide the replacement fan canister all the way into the storage shelf until the orange tab on the
fan canister latches.
2
Check the Fan Power LED and Fan Service Action Required LED on the new fan canister.
3
If the Fan Power LED is off or if the Fan Service Action Required LED is on – Check that the fan
canister is installed correctly. Reinstall the fan canister if needed.
4
When the Fan Power LED is on and the Fan Service Action Required LED is off, the procedure
has been successfully completed.
5
If the Fan Power LED is off and the Fan Service Action Required LED is on, contact Veritas
Technical Support.
HSP 135 Fan Canister Replacement
4
Advertisement
