Magtek DYNAMAG Demo Manual page 8

2 - How to Connect Bluetooth LE devices to a Windows Host
9) Locate the serial number on the label on the bottom of the device. Note the final four digits.
10) Read through the list of pairable devices and locate the device called
, where nnnn is the last four digits of the device's serial number (if the device does
eDynamo-nnnn
not show in the list, power it off then power it back on). Below the device name you should see the
text
Ready to pair
11) Select the device and press the
will prompt you Enter the passcode for your keyboard
DYNAMAG, DYNAMAX, EDYNAMO, UDYNAMO, ADYNAMO, MDYNAMO, TDYNAMO, DYNAWAVE| SCRA Devices | MTNET Demo Guide
Page 8
Launch Manage Bluetooth Devices App from Desktop Mode
Windows 8 Manage Bluetooth Devices App
.
button. If the device is configured to run in KB mode, Windows
Pair
DynaMAX-nnnn
.
or