Magtek tDynamo Quick Installation Manual
  1. Manuals
  2. Brands
  3. Magtek Manuals
  4. Card Reader
  5. tDynamo
  6. Quick installation manual

Magtek tDynamo Quick Installation Manual

Secure card reader authenticator
Hide thumbs Also See for tDynamo:
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
Secure Card Reader Authenticator
MAGTEK RECOMMENDS
CHARGING AT LEAST EVERY
6 MONTHS TO MAXIMIZE
OPERATION.
STORAGE TEMPERATURE:
32°F TO 113°F (0°C TO 45°C)

tDynamo Overview

Point-of-service and point-of-sale needs to be fast, reliable, and secure. tDynamo
delivers on all three and meets the growing demand from your customers to use the
latest technology in the easiest-to-use form factor. tDynamo is a simple way to take
a wide variety of payment methods, in a small, versatile device including magnetic
stripe, chip card, and contactless.

Visual and Auditory Feedback

tDynamo's General Status LED (LED 4) and Status LEDs 3, 2, and 1 provide feedback to the
operator and cardholder about the internal state of the device:
•
Green flashing: Powered on and ready, or indication to swipe a card.
•
LEDs 4, 3, 2, 1 light in sequence: Device has read a contactless tap.
•
All 4 LEDs on together: Device has just been powered on.
•
LEDs 4, 3, 2, 1 light in combination: Battery check result after pressing pushbutton.
•
Steady green: Host has initiated a contactless EMV transaction.
•
Three Blue flashes: After pressing the pushbutton for 2 seconds, the device will transition
to Pairing Mode when the button is released.
•
Short Blue Flashing: Flashing Blue (for pairing mode).
•
Red LED: Operator is updating the firmware.
tDynamo's beeper provides feedback:
•
One short beep on startup: Testing sound.
•
One short beep after it has successfully read a contactless tap: Cardholder can
safely remove the card or device from the contactless landing zone.
•
Two short beeps: Occurs when a transaction is canceled.
•
Two short beeps: Occurs when device is turned off.
tDynamo
Quick Installation Guide
www.magtek.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the tDynamo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Magtek tDynamo

Summary of Contents for Magtek tDynamo

  • Page 1 Visual and Auditory Feedback tDynamo’s General Status LED (LED 4) and Status LEDs 3, 2, and 1 provide feedback to the operator and cardholder about the internal state of the device: •...
  • Page 2 500mA @ 5V. Charging the Device via the Docking Stand “stand” To charge the device using the stand, set the tDynamo in the stand making certain it is fully nested in and touches the charging contacts. Connect the stand’s USB cable to a host that provides at least 500mA @ 5V.
  • Page 3 On the [iOS] host launch the [Settings] app, select [Bluetooth], and check host’s radio button is [On]. Use the app to pair with and connect to the tDynamo. [MagTek Test] in the app store behaves as follows: a.) Launch host app. b.) Select [BLE EMV] as the device type. c.) Press the [Connect] button.
  • Page 4 • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by MagTek could void the user’s authority to operate this equipment. CE STANDARDS Testing for compliance with CE requirements was performed by an independent laboratory. The unit under test was found compliant with standards established for Class B devices.

Table of Contents