How To Use The Mtnet Demo - Magtek DYNAMAG Demo Manual

4 - How to use the MTNET Demo

4 How to use the MTNET Demo
The following instructions detail how to use the MTNET Demo on Windows PC via USB interface.
Same instructions apply to the other interface types.
MTNET Demo queries for device features upon connecting. Some demo features are disabled based on
what is supported on the device. MTNET Demo does not automatically set MSR power or set Time.
1) Connect the device to the USB port of the Windows PC.
2) Launch the MTNET Demo, select USB as the device type in the Type list box, and press the Scan
button to display a list of available devices.
3) Select the Device ID and press the button to open the device.
Connect
DYNAMAG, DYNAMAX, EDYNAMO, UDYNAMO, ADYNAMO, MDYNAMO, TDYNAMO, DYNAWAVE| SCRA Devices | MTNET Demo Guide
Page 14