Magtek DYNAMAG Demo Manual page 17

4 - How to use the MTNET Demo
8) To set the MSR Off for the device, press the
Device will not send card data after swiping a magnetic stripe card but will during an EMV
transaction.
9) To configure the current PC date and time in devices which require a Date/Time be set after power
up, press the
Set Time
DYNAMAG, DYNAMAX, EDYNAMO, UDYNAMO, ADYNAMO, MDYNAMO, TDYNAMO, DYNAWAVE| SCRA Devices | MTNET Demo Guide
Page 17
Set MSR Off
button before performing an EMV transaction.
button.