Page 1
5.8GHz Wireless Microphone System VmicLink5 User Manual...
Page 2
Please retain this manual for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic. com. Cautions 1. Do not use the unit under water, don't expose it to rain.
Hold button for one second or longer Power OFF Hold button until it turns off 3 Portable Receiver VmicLink5-RX Mute ON The Saramonic VmicLink5-RX is a camera-mountable Press button once integrated wireless receiver. It features an easy- Mute OFF to-read LCD display and DigRF synchronization ③...
⑥ Battery compartment Connect the supplied cable to the Line out Install battery: • Plug the supplied 3.5mm cable into the LINE OUT. Slide the switch on the battery compartment cover in the direction indicated by the arrow to • For a secure connection, rotate clockwise to open.
Page 6
① RX & TX connecting indicator "———": The RX hasn't been matched with a TX in this group. Output mode "A"or"B"or"C" flashing: The RX has been The output mode can be set to either mono or matched but hasn't been connected with the TX stereo.
“Match with TX” in the RX (or “Match with RX” in 4 Body-pack Transmitter VmicLink5-TX the TX). The VmicLink5-TX is a compact transmitter that The group number of each TX(s) will be employs a crystal-controlled PLL synthesizer. It is assigned as A, B, or C, based on the order they equipped with a muting function and lock-type are matched in.
④ + or – button Select functions or values shown on the display. ⑤ LCD display Display menus, please refer to "1.4.3 LCD Display Operation Guide" for more details. ⑥ Battery compartment Instructions for installing and removing the battery are the same as for the receiver (page 3). ⑦...
Page 9
③ Volume indicator Indicates the volume of audio output. ④ Mute indicator Mute key enable / disable Hold down the SET button to enable / disable MUTE ON MUTE OFF Mute function. NOTE: If turn on Mute of the TX, only this TX •...
5 Battery Charger Operating 0°C-50°C Use the battery charger to recharge the battery temperature of VmicLink5 system. Storage temperature -20°C-55°C The indicator turns red while the battery is charging. The indicator turns green while the battery has been fully charged.
VmicLink5 RX+TX+TX+TX This package includes one receiver RX and three transmitters TX. NOTE: The RX and TX in different packages can be matched. • Portable receiver: VmicLink5-RX • Shoe mount adapter • Belt clip • Antenna • Rechargeable Li-ion battery •...
Page 12
The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.co...
Need help?
Do you have a question about the VmicLink5 and is the answer not in the manual?
Questions and answers