Installation And Connection; App Interface Introduction - Chasing M2 User Manual

Installation & Connection
Download CHASING GO1 App
1
CHASING GO1 App：
Scan the following QR code or visit the IOS APP
Store/Google Play/Chasing website for downloading.
(For IOS 9.0 or later/Android version 4.4 or later）
Connect ROV with Remote Controller
2
a. Insert one end of the tether connector into the remote controller connector socket.
b. Reserve a suitable length and hang the Buckle on the Buckle Bracket, and make it tension.
c. Insert the other end of the tether connector to the ROV.
d. Securely hand-tighten both connectors.
Start (turn on) the ROV
3
a. Turn on the remote controller power button.
b. A few seconds later, the remote controller' s
indicator lights up, 5G or 2.4G light will be always on.
The drone LED lights will flash shortly,
accompanied by two self-tests sounds.
c. Check all the connectors and lights pre-dive, and
unlock the ROV when everything is ready underwater.
* 2 Warning: Check whether the O-ring on the tether connector pre-dive. If it is missed or damaged, please
replace it in time.
Wi-Fi Connection
4
a. On the Phone/Tablet, go to Wi-Fi settings.
b. Wait for 5-10 seconds and the Chasing_xxxx network will appear as an option.
c. Click to connect and enter the Wi-Fi password: 12345678
6:27 89%
Wi-Fi
Settings
Wi-Fi
Chasing_xxxxx
CHOOSE A NETWORK...
Gladius_5G_xxxxx
xxxxxxxxxx
xxxxxxxxxx

App interface Introduction

xxxxxxxxxx
5
Open the APP and enter the camera, you will see the real-time scene transmission.
General
Settings
Return
VR Live Stream
Shrink Slow
Side
Video Motion
Menu
Temperature
Depth
3D
Gesture
Light
Angle
Unlock/lock
Drop the ROV into Water
6
a. Grasp the grips on both sides of the ROV with both hands and gently throw the ROV into the water.
b. Unlock the Thruster(motors) to dive.
c. For a better experience, it is recommended to ensure that the water depth exceeds 1 meter.
5
* Note： 1. As the drone will connect to the 2.4G Wi-Fi by default, you can switch to 5G Wi-Fi to get a better
experience. (Turn on 5Ghz in the Settings-ROV, the drone's Wi-Fi will automatically restart, and
you may need to re-connect to the Gladius Wi-Fi).
2. You could check more guidance videos on the website page https://www.chasing.com/,or you
could contact the global support team with any questions ： support@chasing-innovation.com
Compass Signal Strength
ROV Mode
Battery
White
Balance
Lock
Picture
Video
Recording
Camera
Settings