Hardware Requirements; Software Requirement - Advantech DVP-1020 Manual

Chapter 1 General Information
DVP-1020 is a 4-channel video input PC/104-Plus video capture
module that supports up to D1 resolution at 30/25 fps frame rate.
DVP-1020 allows installation of up to 4 modules in one PC system by
utilizing an onboard DIP switch setting that identifies card ID by LED
indicators. DVP-1020 supports NTSC/PAL signals and digitizes data to
the PC through the PC/104-Plus interface.
DVP-1020 has an auto wake-up function that provides 10 sets of
time-settings. From an "off" state, two digital trigger pins can also
remotely trigger this function. DVP-1020 also has a built-in watchdog
timer to reset the system and prevent crashes when an unknown error
occurs. DVP-1020 is also designed with a programmable software
protection key for anonymous user software copy protection.

1.1 Hardware Requirements

! Intel Pentium III 1GHz or above (The CPU speed depends on the
video frame rate, channels and resolution)
! 256 MB RAM or above
! Free PC/104-Plus slot

1.2 Software Requirement

! Microsoft Windows 2000/XP with DirectX 8.1 or above
6