Walker B27i Operator's Manual page 21

B27i
SAFETY, CONTROL, AND INSTRUCTION DECALS
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: Deck Gearbox Cover
Part Number: 8600-39
Warning - stop engine and remove ignition key
before adjusting deck cutting height.
Location: Gearbox Cover
(Gear Drive Decks Only)
Part Number: 8600-9
Tighten blade nuts on gear driven decks to
60 lb·ft (81 N·m).
Location: Engine
Part Number: 8600-12
Warning – carbon monoxide (CO) poisoning
hazard.
● CO emitted by a running engine can be deadly.
● Do not operate indoors or in other enclosed
areas.
Location: Engine Shroud
Part Number: 5855
Safety, Control, and Instruction Decals are installed on the machine;
60 lb·ft (81 N·m)
8600-9
8600-12
Location: Rear Body
Part Number: 4107-13
1. Ground drive belt routing.
2. Engine/PTO belt routing.
Location: Front Body
Part Number: 5802-4
Engine Service Indicator Light
● If illuminated during operation contact an
authorized Kohler Service Dealer as soon as
possible.
Location: Rear Body Near Muffler
Part Number: 8600-5
Warning – hot surface, do not touch.
Safety Instructions
1.
2.
8600-5
17