Walker B27i Operator's Manual page 19

B27i
SAFETY, CONTROL, AND INSTRUCTION DECALS
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
3.
4.
5.
Location: RH Fender
Part Number: 8600-48
1. Forward Speed Control
● Move lever forward to increase speed.
● Move lever back to stop.
2. Warning – read Operator's Manual before
servicing or performing maintenance.
● Engage parking brake.
● Remove ignition key.
3. Warning – do not operate the machine without
a deck or other implement attached.
4. Throttle
● Move lever forward to increase engine
speed.
● Move lever back to idle.
5. Warning – roll-over hazard.
● Do not mow or drive the tractor within 5 feet
of an embankment with a drop off.
● Do not operate on slopes greater than 15
degrees.
● Do not mow within 5 feet of a body of water.
Safety Instructions
15