Walker B27i Operator's Manual page 8

Specifications
TRANSAXLE (CONTINUED)
Neutral
Final Drive
Transmission Fluid
Factory Service
Transmission Oil Capacity fl oz (L)
Transmission Cooling
Oil Filter
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)
BLADE DRIVE
PTO Shaft
Blade Drive Clutch and Brake
TIRE SIZE
Deck Caster
Drive
Tailwheel
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel*
Drive
Tailwheel
* If equipped with optional pneumatic tires
MOWER DECK
Recommended Cut Width
Side Discharge
Mulch
Cutting Height
Deck Suspension
4
Transmission Release by Manual Dump Valve
Transaxle Direct to Drive Wheel
20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
77 (2.3)
Cooling Fan Mounted on Drive Pulley
Hydro-Gear P/N 52114 (Walker P/N 2026-6)
®
0-8 (0-13) Infinitely Variable
0-5 (0-8) Infinitely Variable
Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Ogura Electric Clutch with Soft Start Engagement and Mechanical
Brake [Stops Blades within Five (5) Seconds of Disengagement]
8 x 3.00-4 Semi-Pneumatic (Standard)
8 x 3.00-4 Pneumatic 4-Ply (Optional)
11 x 4.00-5 (Pneumatic 4-Ply, DS52, DS62, DS74 Only)
18 x 8.50-10 (Pneumatic 4-Ply Low-Profile)
11 x 4.00-5 (Pneumatic 6-Ply)
20 (137)
15 (103)
20 (137)
36 to 74 in. (91 to 188 cm)
36 to 52 in. (91 to 132 cm)
1.5 to 4 in. (4 to 10 cm) or
1.5 to 4.5 in. (4 to 11.5 cm) (DS52 & DS62 Belt Driven Decks Only)
Independent Torsion-Flex Frame with Caster Wheels and
Counterweight Springs
B27i