Intended Use; Before First Use - Westfalia 85 33 70 Instruction Manual

Intended Use

 The sheet metal nibbler and jigsaw attachment is exclusively
designed for cutting material specified in this instruction manual.
Overhead operation is applicable by means of the twin cutting
shaft. Flat surfaces as well as waved surfaces can be processed
with changeable operation direction of up to 360°.
 The sheet metal nibbler is powered by a drill with standard drill
chuck with a speed of approx. 1500 – 3000 rpm.
 The intended use also includes an operation following the
operating instructions.
 Any use beyond these parameters (different media, applying
force) or any changes (reconstruction, no original accessory) can
lead to serious risks and is regarded as use that is contrary to the
intended purpose.
Before the first Use
Unpack the unit and the accessory and check all parts for damage
in transit. Dispose of packaging material or store it out of reach of
children. Plastic bags etc. may become a deadly toy for children.
ATTENTION!
When using the attachment ALWAYS use the included
retainer (9) to securely connect the neck of the power drill to
the attachment and avoid spinning the attachment. Adjust the
length of the retainer according to your power drill and use it
to connect the neck of your power drill to the attachment as
shown on page IV. Do not use the attachment without the
retainer!
Operation
16