Measured Value - Pepperl+Fuchs KCD2-UT2-1 Manual

Universal Temperature Converter KCD2-UT2-(Ex)1
Configuration tools
6.3

Measured value

If you have started the communication between PACTware
Establish connection), you can open the Measured value window via Device data  Measured
value. It shows the following information on the outputs of the UT2:
• Measured values at the inputs as numerical values and bar graph, displayed in the selected
units.
• Values of the analogue outputs as numerical value and bar graph, displayed in the selected
unit.
and UT2 (e. g. via Device data 
TM
EN
EN - 13